PETE WARD

"WELCOME TO MY OUTDOOR WORLD"


    PAPER TUNING STAND
Heres a quick and inexpensive papertuning stand that is made from pvc pipe.the sizes can be to your liking but this one is 4' high 3'wide and the bottom suports are 3'long,or 18"on each side of the "T".the photos and idea are from John Johnson a regular on the bowsite forums.The stand can be glued with the appropriate glues for the pipe you use or partialy glued to allow for dissambely during transport.The fittings are all socket type,and for paper tuning should not need to be glued,if you want to hang a bag target as john does I would sugest glue all the joints..
you will need the following material,4 tee's,2 90deg. elboes and 20 feet of pipe.
a picture is worth a thousand words so here are a few thousand easy to read words:












CLICK HERE TO VOTE FOR THIS SITE

TUNING STAND


Copyright 2002 PETER WARD